Audi 80 Cabrio 1992

Hi there!

My old Audi has a problem with the fuel gauge and the water temp gauge.
It seems like they´re corresponding.

Somtimes i can see the corrct watertemp. as well as the correct amount of
fuel. Then it changes, so that i can´t see
any watertemp. and the fuelgauge drops down with about 1/4 of the scale.

I suspect it is a loose connection or an electronic problem, i just don´t
know where to start - any help is welcome.

Thanks!

Peter
Denmark

Hi!

Peter Svennson wrote:
>
> Hi there!
>
> My old Audi has a problem with the fuel gauge and the water temp gauge.
> It seems like they´re corresponding.

They are.

> I suspect it is a loose connection or an electronic problem, i just don´t
> know where to start - any help is welcome.

Start with the voltage regulator (3 pin IC) on the backside of the the
intrument panel's circuit board/film. Reseat, resolder, or replace...

So long!
Ero.

--
Ero Rademer ANTISPAM in effect.

> skrev i en meddelelse ...
> Hi!
>
> Peter Svennson wrote:
> >
> > Hi there!
> >
> > My old Audi has a problem with the fuel gauge and the water temp gauge.
> > It seems like they´re corresponding.
>
> They are.
>
> > I suspect it is a loose connection or an electronic problem, i just
don´t
> > know where to start - any help is welcome.
>
> Start with the voltage regulator (3 pin IC) on the backside of the the
> intrument panel's circuit board/film. Reseat, resolder, or replace...
>
> So long!
> Ero.
>
> --
> Ero Rademer ANTISPAM in effect.

Thanks!

I´ll try that.

Peter