Besides the dirty slide bolts the others mentioned, the track the
caliper slides in needs cleaning and high temp brake grease or antiseize
too.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

wrote:
>
> While doing the spring replacement (which is about finished!!) I
> noticed the inner pads on the front brakes were about worn out on both
> the driver and passenger side.
>
> I don't remember exactly when I replaced them -- but seems like 20,000
> miles or so ago. I could be wrong.
>
> The outer pads looked a little worn, but basically had lots of life
> remaining in them.
>
> No damage done to either rotor, but I don't understand why both inner
> pads are almost worn out while the outers were still very, very good.
>
> Could somebody please explain what is going on and what, if anything,
> I can do about it.
>
> Thanks ......
>
> Mike
>
> Michael Pomeroy