You'll need a very small turbo otherwise it will take too high an RPM to
produce much boost.
A draw-through system is easiest, & you would use only one carb that way.
If you do a blow-through system you'd be better off using fuel a injector
system.
You'll need a wastegate, & will have to do alot of fabrication. Check with
the major turbo manufacturers (Rajay, etc.) to see what components are
available.
A good oil source would be an aftermarket oil pump with a side fitting.
On average you'll get a 50% HP increase at around 4 or 5 lbs. boost. If
you go over that you'll need a *really* tight bottom end & other mods.
HTH,
~ Paul
aka "Tha Driver"

Giggle Cream - it makes dessert *funny*!