View Single Post
  #2  
Old December 14th 04, 05:10 AM
Art
external usenet poster
 
Posts: n/a
Default

I know you said that transmission mounts were ok but it sure sounds like the
rear AT mount especially if you feel the clunk under the gear shift console
when parking at a verticle angle.


"Dave A." > wrote in message
...
> My 94 Concorde with 137K miles is getting a bit tired but I need to keep
> in running safely for a few more months so any suggestions will be
> appreciated. It's the 3.3L V-6 if that matters.
>
> I have a "clunk" that I hear and feel in the front suspension. It's hard
> to reproduce but can be heard and felt while turning and hitting a large
> bump like a speed bump in a parking lot. It feels like something is
> moving then popping back into place. I had a "front end specialist" look
> it over and all he could see was a worn tie rod end which he replaced. I
> can't see anything loose or anything that shows signs of moving when it
> shouldn't. The motor & transmission mounts look good. This clunk is
> noticible at low speeds although the car handles fine otherwise - no
> shakes, no pulling, straight, even braking, etc.
>
> I had a similar problem a year ago and the mechanic found that a large nut
> on one of the suspension arms had backed off about 6 turns which allowed
> the arm to move. He assurres me that the nuts are tight now but I still
> have the problem.
>
> I'm concerned that I have an unsafe car on my hands despite what the
> mechanic said. I'd appreciate your thoughts and ideas.
>
> Best regards,
>
> Dave
>
>
>



Ads