"Steve W." wrote:
>
> BTDT,
> Wifes 94 had a plug blow apart in it, the only thing left was the
> threaded portion of the plug. It was stuck real good.
> Came out real easy.
>
> First step - Stick a small rag or towel into the hole and clean up all
> the oil/penetrant and any other dirt.
> Second - Used a very small torch tip to heat the insert almost red hot.
> (I picked up a small oxy/MAPP kit since it was smaller than my big
> torch).
> Third - Use an easy out and screw it in as far as possible. The insert
> may come out while it is hot BUT I waited till it cooled.
>
> Clean up the tools and put a new set of Delco plugs in. Drive away
> happy.
>
> --
> Steve Williams
>


Delco plugs in a Mopar?!!! Never!!!

JAM