Crutchfield.com sells wiring kits to adapt standard radios to the Ford
wiring harness. Also take a look at http://www.bestkits.com/

On Fri, 6 May 2005 10:00:29 -0700, "Ulysses"
> wrote:

>
>"K9KO" > wrote in message
...
>>
>>
>> The install kit I seen at WM did not have the removal tool or wiring
>> adapters enclosed. The packaging is deceiving.
>> In small print is says best used with/then in large print DIN removal
>> tool and wiring, giving you the impression its enclosed.
>
>I noticed that the wiring connector was seperate, but I missed the removal
>tool part. Thanks.
>
>> And the connectors at WM for the explorer were 2 of the long ones that
>> would have fit my radio but not the vehicle end.
>> I think my next step is to pull one out of a similar vehicle in a
>> salvage yard and check the wiring.
>>
>
>I emailed you a pic of the connections on the back on my stereo from my '91.
>With the unit right-side-up the connectors will be on the right. The top
>one on the far right has two connections, the middle has eight, and the
>bottom one has six. The longer connector toward the left has eight. It
>seems unlikely that it would be different for a '93 but we are talking about
>Ford here.
>
>Hope this saves you a trip to the salvage yard.
>