Thread: 1994 525i
View Single Post
  #4  
Old January 10th 05, 06:40 PM
Chip L
external usenet poster
 
Posts: n/a
Default

I've found that the up/down switches on my '93 E34 get a lot of gunk
(coffee, soda, etc) down in them due to their placement and occasionally
need to be taken out and cleaned.

Chip L

"Rainey" > wrote in message
news:a8MCd.13755$ce6.13067@lakeread07...
> Hello. New to this group
> I recently bought my new/old BMW from a friend of mine.
> My question is:
> The dashboard computer kept signaling one of the taillights was out.
> I replaced all bulbs on that side.
> That side worked, but the next day, the other side went out.
> Replaced those bulbs.
> Same thing with the OTHER side I had just replaced....
> To be sure, I checked the fuse box, and everything was in working order.
> Also, the passenger window is acting strangely.
> When I first bought the car, it did not work. About 1 month later, it
> started working, then it stopped again lol.
> There was no fuse for it Just had to make sure.
> When you press the button, you can hear *something* happening, but no
> movement. Would this be something akin to "off the track"? Do you think,
> after obtaining the proper manual, it would be something I could fix?
> OK last one, I swear! The driver's seat will move, but once it gets to a
> certain degree forward, only one side moves and the other side stays

still.
> I have to sit a bit crooked
> Since the motor still works, any ideas?
> We were thinking of replacing the motor with one from a junkyard....
> (If you cannot tell, I do most of my own repairs. I just have never had a
> BMW before lol)
> Thanking ya'll in advance,
> Rainey
>
>



Ads