>Are the 1 ton frames full sized 8 foot box frames?
All military chevys use the FULL 8 foot frame. (extra reenforced)
their is NO short military chevy M series pickups (airforce or navy
might have just regular short pickups)
>
>Or, are they the shortened military frames, that used the cut off box?
>

>
>Are the front Dana 60's set up for Budd wheels with Dual Rear Wheels, or
>single rear wheels?
all single rear wheels
single hub front.
(military did have some duellys though)
>
>The price sounds kind of high, but maybe if they're not full of Arabic sand
>and no bomb parts. I might be interested.
actually pricecheap 4x4 dealers want 2000 for just front.
like boyce equip
>
>
>"MilitaryTruckParts" > wrote in message
.. .
>> OOPS
>> left out that these are CHEVY'S
>> parts fit, Chevy, GMC trucks
>>
>>
>> >Hi
>> >We recently bought some nice US MILITARY SURPLUS
>> >1985 and 1986, 1 ton PICKUPS (M1008), and BLAZERS (M1009). (CUCV)
>> >These are the militarized versions of the standard civilian pickups
>> >and blazers (camo paint, reenforced frames, gun mounts, radio mounts,
>> >24 volt, special towing and lifting equipment).
>> >
>> >We are parting some of them out in Southern Maine, and Southern NH.
>> >
>> >We have all types of parts available EXCEPT ENGINES
>> >FRONT, AND TAILGATE GLASS, DASH PADS, (LOOKING TO TRADE FOR ALL
>> >THESE)
>> >Most of these vehicles are RUST FREE or have very little rust.
>> >We have been selling many parts to restore civilian trucks, or
>> >restore the military version.
>> >
>> >PARTS FIT:
>> >1981-87 PICKUPS
>> >1981-90 BLAZERS, SUBURBANS
>> >Some parts can be adapted to other vehicles like AXLES.
>> >
>> >SOME PARTS FOR SALE A
>> >
>> >1 TON DANA 60 AXLE SET, with 4.56 gears. From the Pickups.
>> >These have the open carrier DANA 60 FRONT AXLE, Straight Tie Rod,
>> >Locking Hubs, Disc Brakes, good thick rotors, AND A CORP 14 BOLT
>> >REAR with DETROIT LOCKER, Big 13" drum brakes. 20-30,000 miles.
>> >$1299.00 a set FIRM, WILL NOT SELL FRONT AXLE BY ITSELF. REARS
>> >might be available seperatly.
>> >
>> >1/2 ton, 4x4 AXLE SETS from BLAZERS, (same as 1/2 ton pickup).
>> >GM 10 bolt (is the front DANA 44?, somwe people have said yes??)
>> >3.08 gears, disk breaks in front, drum in rear. locking hubs.
>> >bent tie rod , only $200.00 set
>> >straight tie rod $250.00 set
>> >
>> >GOOD RUST FREE, DENT FREE BODY PARTS (dented for less)
>> >PERFECT FRONT FENDERS $75.00
>> >COMPLETE DOORS WITH GLASS $150.00
>> >RADIATOR SUPPORTS 25.00
>> >PICKUP CABS $300.00 - $500.00
>> >PICKUP TAILGATES $150.00
>> >FRONT GRILL GUARDS (MILITARY) $75.00
>> >FRONT BUMPERS 75.00
>> >REAR BLAZER BUMPERS $125.00 (WITH TOWING PINTLE HOOK)
>> >REAR PICKUP STEP BUMPER WITH TOWING PINTLE HOOK $150.00
>> >STRIPPED BLAZER TAILGATES $100-150.00
>> >RUST FREE PICKUP BEDS WITH DENTS, ASK!
>> >RUST FREE 1 TON PICKUP FRAMES $400.00 WITH SPRINGS
>> >BLAZERS REAR CAPS (NO GLASS $50.00)(OR FREE IF BUYING OTHER STUFF)
>> > " " " (WITH GLASS $100.00)
>> >
>> >Some other parts such as all the military accesories, seats,
>> >instruments, drive train, etc, ASK, ASK, ASK
>> >
>> >208 Aluminum TRANSFER CASES, Good, Need cleaning $100.00
>> >
>> >We have some RUST FREE ROLLING BLAZERS BODIES, NO ENGINES,
>> >With assorted other parts, WITH paperwork to register. About
>> >$1,500-$2,000 each. (NO MORE BODIES BY THEMSELFS)
>> >
>> >Anyway these are a few of the parts we're selling off these vehicles.
>> >remember, rust free parts with dents are less. (rusted stuff going to
>> >scrap pile).
>> >
>> >So, just tell us what part you need. and we'll reply.
>> >SOME PARTS MIGHT NOT BE ACCESSIBLE TILL SNOW MELTS
>> >
>> >Reply to
>>
>> >REMOVE,REMOVE from the return address to reply.
>> >
>> >Thanks for your time.
>> >Ron
>> >
>>
>
>