View Single Post
  #35  
Old July 20th 05, 10:56 PM
external usenet poster
 
Posts: n/a
Default



Thomas Sajnovic wrote:
> Two questions
> Chrysler Dynasty 1992, 3.3L
>
> 1)Engine oil leak - Over the past couple months I've notice a leak (thats
> getting worst) from the engine. It isnt coming from the heads or head
> covers, so it isnt a gasket or leak from the top of the engine. I have
> changed out the oilpan gasket as it looked the leak was originating from
> there. After the gasket was changed, the leak continued and would come out
> from around where the bell housing and engine would meet. The flywheel is
> dry, so I would assume it would not be a main crank seal at the rear of the
> engine. Any ideas as to where this leak could be coming from?
>
> 2) Power Steering pump pulley - Has anyone ever had to get a pulley changed
> out on this pump? I changed out the water pump last weekend and since the
> belt was off, I noticed the power steering pump pulley was loose on the pump
> shaft. I also noticed that it was plastic, and would account for it to
> wobble on the shaft due to wear. Have these always come with plastic
> pulleys, or is there a metal pulley you can get for it?
>
> Thanks,
> Tom


I once had a leak from the timing case on my 3.3, that appeared as
though it was coming from the oil pan. It took the dealer three tries
to figure it out. Luckily, the warranty covered it.

-Kirk

Ads