spark plug "holes" in valve cover full of oil!
>> When you see a kit, you'll think "Thirty-five dollars for that!" The
>> gasket
>> looks like it was squeezed out of a silicon chalk gun onto a piece of
>> cardboard and then wrapped in kitchen-grade Handi-Wrap.
>
> You could try to mold your own out of silicone RTV.
I believe you could do it yourself with a RTV in a chalking gun and maybe it
would adhere better as well. It is pretty thick (maybe 1/4 inch in
diameter).
If I had the problem again, I would try it as the Saturn gasket set is
pricey at best.
B~
|