No, it did not pass. I thought the muffler might be obstructed so I cut
(mostly) through the exhaust pipe before the muffler. However, it still
won't fire at all. I will replace the ECU tomorrow (ignition module)
tomorrow although I do have spark at the plugs. Stay tuned!
"55chevy210" > wrote in message
news:UmCyd.550121$wV.453388@attbi_s54...
> muffler looks swollen? sounds like something came apart inside causing
some
> obstruction in the exhaust. and, did it pass inspection like that?
>
> "Mike Alvarez" > wrote in message
> ink.net...
> > The plugs were OK.
> > "Mike Alvarez" > wrote in message
> > link.net...
> >> Thanks Midnight...
> >> I had taken it to the inspection station. One of the things he did was
> > plug
> >> up the exhaust to look for leaks. When he gave it back, then it would
> > only
> >> do 20mph. I thought my muffler looked a little swollen... I was
> >> wondering
> >> about that. In the meanwhile I replaced the spark coil and ballast
> >> resistor with no results. I will check the plugs and get back to you.
> >> Keep
> >> those ideas coming!
> >> > wrote in message
> >> ups.com...
> >> > Have you checked your plugs? The not going above 20 could be a
clogged
> >> > catalytic converter and that would carbonize your plugs.
> >> >
> >>
> >>
> >
> >
>
>