On Sun, 9 Jul 2006 07:39:22 -0400, "maxpower" >
wrote:

>
>"Michael" > wrote in message
.. .
>> I recently bought some component speakers to replace the door 6x9s and
>> dash 5-1/4 speakers in my 2002 Caravan. I'm having troubles figuring
>> out how to run new speaker wire to the door speakers. I see there's a
>> wire harness where the door meets the door frame (for removing the
>> door, I guess?). I could probably either use or replace the speaker
>> wire from the speaker to the harness, but I'm not sure how to get the
>> wire from the crossover to the harness on the door frame side.
>>
>> Has anyone done this or did you come up with another solution? I'm
>> also looking for tips on where and how to mount the crossover. Looking
>> under the dash, I'll probably just strap it to something on each side,
>> but again, if you came up with a good spot / solution, I'd appreciate
>> any tips.
>>
>> Thanks!
>
>If you are going to replace the speakers (remove them) why not just use the
>wires that are already there once you take the old speakers out?
>
>Glenn Beasley
>Chrysler Tech
>

That would be ideal of course, but because these are component
speakers, it complicates things a bit. Instead of speaker wire going
directly from the deck to the speakers, the wire will first go to the
component crossover, where it is then split and separate wires go to
the tweeter in the dash and the 6" woofer in the door.

Michael