View Single Post
  #6  
Old July 24th 05, 02:07 AM
TeGGeR®
external usenet poster
 
Posts: n/a
Default

jim beam > wrote in
:


>>

> try not to chase if you can avoid it. if you jack the arm up into
> position and use the right bolt, the one with the rounded end, you
> should be able to get it in ok. the jacking bit is the key. one
> time, i even dropped the two big pivot bolts back off to make it
> easier to get a difficult top arm in. once located & loosely bolted,
> getting the pivot bolts back was fairly straight forward. do the one
> with the elongated slot first.
>



By the way, I tried a bolt from the other side and the same thing happened,
so I'm sure there's a burr in there somewhere.

--
TeGGeR®

The Unofficial Honda/Acura FAQ
www.tegger.com/hondafaq/
Ads