Snydley wrote:
> I removed the Infinity CD/Tape/Radio unit from my 2000 Caravan because the
> CD player no longer works and I am attempting to replace it with an
> aftermarket unit. I bought a dash adapter and wiring kit so I wouldn't have
> to cut/splice any of the wires.
> Now that I have it installed the rear speakers won't work. Wanting to rule
> out bad rear channels in the receiver, I swapped the front and rear speaker
> connections. The front speakers still work using the rear channels of the
> receiver, so I know the receiver is ok, and it must be something with the
> wiring. I tried to get continuity with my V/Ohm meter and couldn't get any
> with the rear speakers.
> As a last ditch effort, I went to the local Mopar garage and told the guy at
> the service counter my story and he told me that "you can put an Infinity
> receiver in a non-Infinity vehicle, but you can't put an aftermarket radio
> in an Infinity equipped vehicle without replacing the speakers. Each speaker
> has it's own amp on the back of it". By that I figured he meant a diode or
> transformer of some kind.
> Is there any way I can use the stock speakers? Remove the diode/transformer
> or something.
> What do people usually do in this instance?
>
> Thanks,
> Snydley
>
>
A few rounds with google would have gave you your answer.
Search for "PAC OEM-1 adapter".

http://www.pac-audio.com/oem1kits/oem1search.htm

Bob


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---