I have removed them before,, I used a little heat on the outside edge of
hinge,, and drove out from the bottom up. if you try to beat out from top,
you are asking for trouble!!!!
"Ervin Charles" > wrote in message
...
> Hey All,
> I've got slack in the drivers door hinges on my 76 vert. Is there a
tool
> available, either store bought or homemade that will allow me to press out
> the pins in the hinge instead of beating them out with a punch and hammer?
> Have any of you changed them out? I'm wide open to any 'best practices' to
> eliminate the sagging door.
> Thanks,
> Charles
>
>