Jeep 4.0L with Rubicon tires (30.6") and 4.56 ok?
 

You're more likely to break an axle locked on 31's then you are open on
33's. My advice would be to get the 31's, leave the stock gears. Go to
4.56's when you get 33's and leave it open, if you want to lock it get a
D44. A D35 WILL break very easily if locked.

A TJ open on 33's will wheel very well.

Carl


"kion" > wrote in message
ups.com...
>I Have a 2005 TJ with 4.0L and 3.07 with 30.6 tires, in my next upgrade
> i'm installing a detroit locker on the rear axle and a True Track in
> the front axle with 4.56 Gears? What are your experience with this
> setup?
>
> I'm specially concerned about the gear ratio, since i'm not very sure
> weather to install the 4.11 or the 4.56. I have not installed 33's
> because I do not want to break an axle. but probably will.
>
> Please any experience Will be of great help.
>

Jeep 4.0L with Rubicon tires (30.6") and 4.56 ok?
 

Please keep a camera in your TJ and send the pictures of your
broken Dana 35c to: http://www.billhughes.com/dana35c/ Thanks.
God Bless America, Bill O|||||||O
http://www.billhughes.com/dana35c/

kion wrote:
>
> Was that an ARB forgotten to turn off ?
>
> Yes I do have the Dana 35 rear axle, but I belive that if I go easy on
> the throttle while turning I might get away without breaking my axles
> right?