How do I clean a bug's gas tank
Hi All
I just got a 75 fuel injected non-super bug. It has been sitting since 91 (that's the date on the last inspection sticker). Before I try anything, I'd like to make sure that it doesn't suck sludge through the injectors so cleaning the tank is probably a good idea, right? Is just emptying the tank enough? Or is there a way for me to take the tank out and clean it? (It must have rust and gunk build up all over, right?) Is that is possible, how do I do this? I am totally new to the wonderful world of bugs, so appreciate any suggestions. Thanks! Remco (btw, sorry if somehow this gets posted twice -- using the new google interface and it does weird things sometime). |
One way I have seen done is to remove the tank and put "The Works" into the tank and hit the inside with a power washer.
A better way would be to have the tank clean and professionally sealed. I paid $50 for a non-VW to do that. A third option is just to buy a new tank. > wrote in message ups.com... > Hi All > I just got a 75 fuel injected non-super bug. It has been sitting since > 91 (that's the date on the last inspection sticker). > > Before I try anything, I'd like to make sure that it doesn't suck > sludge through the injectors so cleaning the tank is probably a good > idea, right? > Is just emptying the tank enough? Or is there a way for me to take the > tank out and clean it? (It must have rust and gunk build up all over, > right?) > > Is that is possible, how do I do this? I am totally new to the > wonderful world of bugs, so appreciate any suggestions. > > Thanks! > Remco > > (btw, sorry if somehow this gets posted twice -- using the new google > interface and it does weird things sometime). > |
Hey Ben
Thanks -- "the works" sounds good - right now I am really just evaluating what needs to be done to get the car runnng. I have a power washer and am not afraid to use it. Would I use a degreaser like that stuff they always demonstrate at Sams club and BJs? Thanks! Remco |
Some good advice I was given that I will regurgitate:
If you are in depserate need of a clean/new fuel tank, invest in fuel filters. You 'should' have two installed. One just below the tank in the front of the car (connecting between the small piece of rubber line coming out of the bottom). And a second in the engine cabinet between the pump and your carb. I like to go with those cheap paper filters (the clear plastic covered ones). That way you can get a quick look at how dirty it is when checking your oil. This is of course just buying time until you can get around to that new tank. I have been swapping filters every couple of weeks for a few months. I probably could have bought that new tank by now if I had thrown those dollars into a piggy bank. ;-) -Ray |
Ray Dios Haque wrote:
> > Some good advice I was given that I will regurgitate: > > If you are in depserate need of a clean/new fuel tank, invest in fuel > filters. You 'should' have two installed. One just below the tank in > the front of the car (connecting between the small piece of rubber line > coming out of the bottom). And a second in the engine cabinet between > the pump and your carb. BEFORE the pump!!!!!!! Never on the pressure side!! Jan |
In article >,
Jan Andersson > wrote: > BEFORE the pump? > > Never on the pressure side! Why? I've used them there for thirty years with no problem... I change them at least once a year (car stays in storage all winter). I know about the issue of ones left too long being a fire hazard from cracking and then leaking, but I change them so often that I'm not all that concerned. -- ___ |___| '61 - VW (o\_|_/o) Bug! ALEA -- 35.9 BHP and not a bit more! _U_____U_ |
>(It must have rust and gunk build up all over,
>right?) As far as rust goes, there's a fairly easy way to get that out if you remove the tank. Drop in some nuts and bolts and shake your booty! Actually, shake the tank around. The bolts will knock loose the rust and it will just pour out when you tip it. MAKE SURE YOU GET ALL THE NUTS AND BOLTS OUT WHEN YOU'RE DONE! lol Though thinking now, that will work for a dry tank. It won't help much with sludge. So if you wanted to drain the tank and wait for it to dry, you could do that for the rust and then try one of the other suggestions for the sludge build up. (Who says I can't be helpful?) K. "So tonight I'll ask the stars above, how did I ever win your love? What did I do? What did I say to turn your angel eyes my way?" |
Appreciate all those helpful tips. Initially cleaning seemed to be the
way to go to me, but after weighing everything, the best approach is just to replace the tank - that way I know what I have. Another couple of questions: Are the tanks sold at JCWhitney ok? How about some of the other parts they sell? I also definitely need floorpans - are JCW's pans ok? Or are there other good part stores you guys use? To get rid of whatever crud is in the system, could I just blow air from the pump down intake to the tank (the old tank, that is)? After that, I'll replace the flexible portion of the fuel line since it can't be in great shape after 13 years. Is that the best way to do that? Thanks a lot -- really appreciate the input. Remco |
I wouldn't buy body panels from JC Whitney. You are just bound to have problems with that. Try an outfit like
aircooled.net http://www.aircooled.net/new-bin/vie... 200444740828 as for the gas tank Tim Rogers of this very newsgroup has reported good results with a tank from Advance Auto Parts. http://www.partsamerica.com/PartDeta...1296&PT Set=A which may be a very good option if you have an advance nearby. > wrote in message oups.com... > Appreciate all those helpful tips. Initially cleaning seemed to be the > way to go to me, but after weighing everything, the best approach is > just to replace the tank - that way I know what I have. > > Another couple of questions: > > Are the tanks sold at JCWhitney ok? How about some of the other parts > they sell? I also definitely need floorpans - are JCW's pans ok? > Or are there other good part stores you guys use? > > To get rid of whatever crud is in the system, could I just blow air > from the pump down intake to the tank (the old tank, that is)? > After that, I'll replace the flexible portion of the fuel line since it > can't be in great shape after 13 years. Is that the best way to do > that? > > Thanks a lot -- really appreciate the input. > Remco > |
All times are GMT +1. The time now is 05:47 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com