how to get rid of rust
I am starting restoring my 70 bug. The question is there is some rust ,
mostly surface, on the rain gutter. the body shop that painted it the first time did not pain the car correctly so the rust has blistered the pain and was wondering how I should go at the rust? I do know that there is some under the pinch weld (between the side panel and the roof pane) but how should I get rid of it? I really do not want to have to cut off the rain gutter and weld in a new one if I can avoid it. George |
Hi George:
The best way for you to get the rust out of any beatle is to burn the ****er to the ground, and i mean to the ground use a mix of about 80 to 1 ( 80 being petrol and 1 being a match) or if you have any further enquires pls take you vehicle to a reputal mechanic glad i could help. "george taylor" > wrote in message ... > I am starting restoring my 70 bug. The question is there is some rust , > mostly surface, on the rain gutter. the body shop that painted it the first > time did not pain the car correctly so the rust has blistered the pain and > was wondering how I should go at the rust? I do know that there is some > under the pinch weld (between the side panel and the roof pane) but how > should I get rid of it? I really do not want to have to cut off the rain > gutter and weld in a new one if I can avoid it. > George > > |
There is no weld, (maybe just spot welds) , but the side pannel and the roof
pannel are folded together and pressed, to form the rain gutter lip. This is a difficult area to rust proof, because rust is hidden inside the seam. The best you can do is to completelly remove all layers of paint to bare metal with a wire wheel. Remove all the rust that you can with the wire wheel. Then paint with a rust converter and then epoxy primer. This way you seal the rust fairlly good, but it is not 100% guaranteed that rust won't show up again in the rain gutter seam. Bill, '67 Bug. "george taylor" > wrote in message ... >I am starting restoring my 70 bug. The question is there is some rust , >mostly surface, on the rain gutter. the body shop that painted it the first >time did not pain the car correctly so the rust has blistered the pain and >was wondering how I should go at the rust? I do know that there is some >under the pinch weld (between the side panel and the roof pane) but how >should I get rid of it? I really do not want to have to cut off the rain >gutter and weld in a new one if I can avoid it. > George > |
I would sand blast the area real well. then use metal conditioner
(phosphoric acid), prime, and fill and spaces with seam sealer, reprime and then final coat. "george taylor" > wrote in message ... >I am starting restoring my 70 bug. The question is there is some rust , >mostly surface, on the rain gutter. the body shop that painted it the first >time did not pain the car correctly so the rust has blistered the pain and >was wondering how I should go at the rust? I do know that there is some >under the pinch weld (between the side panel and the roof pane) but how >should I get rid of it? I really do not want to have to cut off the rain >gutter and weld in a new one if I can avoid it. > George > |
All times are GMT +1. The time now is 08:07 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com