92 735 Instaling Alarm/remote entry
I have a stock BMW alarm in there; and I would like to tap into that harness as
much as possible -- as I can crimp ends to go onto the existing connector The connector is a grid 4 x 3 (I understand a more standard one is 2 x 6) 1 2 3 X 5 6 7 8 9 10 X 12 (X = Unused, no wire) 1 = Brown wire, Ground 2 = Black/white, Door sensor 3 = Blue, Trunk sensor 5 = Purple, UNKNOWN 6 = Red, Horn 7 = Purple, UNKNOWN 8 = Black/yellow, Lock 9 = Yellow, fused positive 10 = Black, UNKNOWN 12 = Blue/yellow, Unlock I would prefer not using vampire taps for these items; but will have to I think. 1) Brake peddle/switch (Auto lock doors when applied) 2) Ignition On 3) Parking Lights My questions, for you learned folks a A) Do you know what the unknown wires are for above? B) Do you know which wires, or places I can tap into for the 3 items above? Thanks for your time --- AntiSpam/harvest --- Remove X's to send email to me. |
All times are GMT +1. The time now is 05:55 AM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com