warped brake rotors - ongoing ?
Just a posting about the historical and ongoing
warped brake rotor problem - Jeep Grand Cherokee Laredo 2001 - I had "serviced" the "warped" rotors at about 15k, 30k, & 45k, replacing them at the original 15k service visit, grinding at the 30k, and replacing again at 45k. At the 45k mark, I had the standard rotors replaced with some drilled & slotted upgraded versions on the front... Now we are at 54k, and approaching the next 15k interval at 60k. I can almost sense the coming of the steering wheel vibration during braking. Has there been any consensus about the "warped" rotor problem ? Since I'm now using a different set of rotors, they don't seem to fit into the equation for failure... Some of the past ideas were : rotor material pad material overtightening the lug nuts with impact wrenches Any updates or other current observations as I approach the next rotor inspection |
warped brake rotors - ongoing ?
just an added note -> There was a Jeep technical service bulletin addressing "the warped rotor problem", that changed some parts of the braking assembly.... That TSB was "applied" on one of the early rotor service visits. http://www.wjjeeps.com/tsb_list.htm#0500302b |
warped brake rotors - ongoing ?
|
warped brake rotors - ongoing ?
"Phil Schuman" > writes:
> Just a posting about the historical and ongoing > warped brake rotor problem - > Jeep Grand Cherokee Laredo 2001 - > > I had "serviced" the "warped" rotors at about 15k, 30k, & 45k, > replacing them at the original 15k service visit, > grinding at the 30k, and replacing again at 45k. > > At the 45k mark, I had the standard rotors replaced > with some drilled & slotted upgraded versions on the front... > Now we are at 54k, and approaching the next 15k interval at 60k. > I can almost sense the coming of the steering wheel vibration during > braking. > > Has there been any consensus about the "warped" rotor problem ? > Since I'm now using a different set of rotors, > they don't seem to fit into the equation for failure... > Some of the past ideas were : > rotor material > pad material > overtightening the lug nuts with impact wrenches > > Any updates or other current observations > as I approach the next rotor inspection > > Your story sounds familiar. I sympathize and offer the following story for commiseration purposes. I bought a new '99 Land Rover Discovery II. I loved it for the first 40K miles. 1. At 20K miles, I had to replace the front brake pads. 2. At 30K miles, I had to replace a cracked radiator 3. At 37K miles, the starter motor died with no warning. 4. At 40K miles, I replaced all the pads. 5. At 50K miles, I replaced all the pads and rotors. 6. At 67K miles, I learned that the intake manifold was cracked At 67,200 miles, having never taken it off-road, having never hit a bump bigger than a speed bump, having a trade-in value $6,000 lower than what I still owed on it, I dumped it for a new '04 Jeep TJ. I have never been happier with a vehicle in all my life than I am with my Jeep. The Jeep and I go off-roading at least twice a month. At 20K miles, the protective film had barely worn off of the front rotors. At 35K miles, not one problem -- mechanical or otherwise. I guess my LR was cursed. I've not met anyone who has had similar problems -- at least none who'd admit to it. -- |
warped brake rotors - ongoing ?
It's the calipers that were the problem and should have been
replaced under warranty: http://alldata.com/TSB/04/010418eQ.html Like: http://www.billhughes.com/WJCaliber.jpg God Bless America, Bill O|||||||O Phil Schuman wrote: > > Just a posting about the historical and ongoing > warped brake rotor problem - > Jeep Grand Cherokee Laredo 2001 - > > I had "serviced" the "warped" rotors at about 15k, 30k, & 45k, > replacing them at the original 15k service visit, > grinding at the 30k, and replacing again at 45k. > > At the 45k mark, I had the standard rotors replaced > with some drilled & slotted upgraded versions on the front... > Now we are at 54k, and approaching the next 15k interval at 60k. > I can almost sense the coming of the steering wheel vibration during > braking. > > Has there been any consensus about the "warped" rotor problem ? > Since I'm now using a different set of rotors, > they don't seem to fit into the equation for failure... > Some of the past ideas were : > rotor material > pad material > overtightening the lug nuts with impact wrenches > > Any updates or other current observations > as I approach the next rotor inspection |
warped brake rotors - ongoing ?
Do you use a torque wrench on your lug nuts?
Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) Phil Schuman wrote: > > Just a posting about the historical and ongoing > warped brake rotor problem - > Jeep Grand Cherokee Laredo 2001 - > > I had "serviced" the "warped" rotors at about 15k, 30k, & 45k, > replacing them at the original 15k service visit, > grinding at the 30k, and replacing again at 45k. > > At the 45k mark, I had the standard rotors replaced > with some drilled & slotted upgraded versions on the front... > Now we are at 54k, and approaching the next 15k interval at 60k. > I can almost sense the coming of the steering wheel vibration during > braking. > > Has there been any consensus about the "warped" rotor problem ? > Since I'm now using a different set of rotors, > they don't seem to fit into the equation for failure... > Some of the past ideas were : > rotor material > pad material > overtightening the lug nuts with impact wrenches > > Any updates or other current observations > as I approach the next rotor inspection |
warped brake rotors - ongoing ?
It is interesting that I have never done any brake work on my twelve year
old Wrangler, other than an occasional inspection of the pad thickness and rotor condition. There is some rotor scoring, but the pads are still pretty thick, and the brakes perform as well as they did when new. Earle "Mike Romain" > wrote in message ... > Do you use a torque wrench on your lug nuts? > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > Phil Schuman wrote: > > > > Just a posting about the historical and ongoing > > warped brake rotor problem - > > Jeep Grand Cherokee Laredo 2001 - > > > > I had "serviced" the "warped" rotors at about 15k, 30k, & 45k, > > replacing them at the original 15k service visit, > > grinding at the 30k, and replacing again at 45k. > > > > At the 45k mark, I had the standard rotors replaced > > with some drilled & slotted upgraded versions on the front... > > Now we are at 54k, and approaching the next 15k interval at 60k. > > I can almost sense the coming of the steering wheel vibration during > > braking. > > > > Has there been any consensus about the "warped" rotor problem ? > > Since I'm now using a different set of rotors, > > they don't seem to fit into the equation for failure... > > Some of the past ideas were : > > rotor material > > pad material > > overtightening the lug nuts with impact wrenches > > > > Any updates or other current observations > > as I approach the next rotor inspection |
warped brake rotors - ongoing ?
Just last year, I put my first set of new front
pads on my '89 YJ. I bought the car at 57,000 and it has 148,000 now. Rotors are still the original! Joe '89 YJ 4.2 5spd "Earle Horton" > wrote in message om... > It is interesting that I have never done any brake work on my twelve year > old Wrangler, other than an occasional inspection of the pad thickness and > rotor condition. There is some rotor scoring, but the pads are still pretty > thick, and the brakes perform as well as they did when new. |
warped brake rotors - ongoing ?
good point, the torque issue may be the key to the problem....from
someone who had to have the rotors "ground" in less than 300000 in an 01 gc while on vacation.... Larry |
warped brake rotors - ongoing ?
Opps I met 30,000 miles...just wishful thinking about 300,000 miles....
Larry |
All times are GMT +1. The time now is 04:46 PM. |
Powered by vBulletin® Version 3.6.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
AutoBanter.com