Grinder recommendations for sheet metal/MIG?
 

I'm D-I-Y-ing a quarter panel and trunk floor on my hobby car, and am in
need of some advice on grinding the MIG welds in the sheet metal.

What specific grinders, wheels/materials, and speeds (RPMs) work best?
I have compressed air available.

Thanks in advance,

Brian

4 1/2" high speed grinder and flap wheels do a great job. Just keep the
heat down to prevent warpage. Your choice on air or electric. If you go
with air you can get a high speed unit that will work as a
grinder,sander and by adding a chuck a decent drill.

--
Steve Williams

"Brian" > wrote in message
...
>
> I'm D-I-Y-ing a quarter panel and trunk floor on my hobby car, and am
in
> need of some advice on grinding the MIG welds in the sheet metal.
>
> What specific grinders, wheels/materials, and speeds (RPMs) work best?
> I have compressed air available.
>
> Thanks in advance,
>
> Brian
>
>



----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Steve W. wrote:
> 4 1/2" high speed grinder and flap wheels do a great job. Just keep the
> heat down to prevent warpage.

OK -- will try (but probably not too soon). Have a 4.5 electric
grinder, and just picked up some flap disks for it too. Also will try a
much slower 7 inch sander/grinder.

Thanks,

Brian