Hi All! Last summer my RL brakes overheated so much that the pads melted to the disc. I took it into meineke (not happy with the local dealer's previous work) and they replaced the calipers, etc. The symptom would be a howling just after releasing the brakes after they had heated up. After a...

Is there a TV with built in tuner for car use that does NOT need to be permanently mounted in the vehicle but can be moved form vehicle to vehicle? This would be for use in a car while on driving vacation but also to be used in very small apartment

saw this movie "who killed the electric car" at sundance film fest. i have made it my mission to get the word out about this movie no matter how deep in the grass roots I have to go! www.whokilledtheelectriccar.com a reviewer at the same screening I was at said this: I saw "Who Killed the...

A buddy's 96 Buick with 3.8 and auto tranny acted up this weekend and asked if i knew what may be wrong. I don't of course so posting the qestions. He was driving at about 60mph with cruise on and noticed the tach moving up to 4000 rpm and car was slowing down. Tapped brake and drove without...

Hi my name is Hal and I just found your site, and from what I have seen this is the place for information!, so here is my question, I have a pair of 45 year old, once in a life time clear plastic lenses that need to be restored, the lenses are not missing any pieces and are still very clear, but...

My 94 Grand Prix starts, revs up to about 3000 rpm, and stalls withing a couple seconds. I've got fuel and spark, but it still stalls. Mass airflow sensor, or maybe O2 sensor? Can someonepoint me in the right direction? Thanks for any help/info. Tim

I think that my Quest needs a new TIME CONTROL MODULE which controls the interior lights. The lights won't turn off when you shut the door. I 've been told that it is a black and green box about 3X5X1" and is under the dash on the drivers side. I can't find it. I even went to the junk yard and...

Seems like the easiest way to put it back on would be Epoxy. Good idea? Better idea?

Are calipers supposed to move freely once it's fitted? GM service manual says "The brake caliper should move easily within the brake caliper bracket" I'm not sure about this though...once the caliper bolts are tightened, I sure can't move the caliper! The same with the original fittings...they were...

The truck has 15000 miles on it and has been thru 3 engines due to pre-detonation. Timing is correct but jumps around a bit, have verified chain to be OK. has new distributer and pickup, ICM checks OK, Ive been thru idle air , map & 02 sensors , any ideas what else could cause this condition...

Hello, When my Jeep (130,000 mi.) is in park, or moving very slowly, I here a rattling/clicking sound. Any ideas as to what it may be? Thanks in Advance!

Car buying advice wanted! I kind of like the following models - These are approximate RANGES available in my area. I've looked them inside and out but have not driven them except for Chevy Classic rental cars. I'll be doing all my own work on them. 03 Infiniti G3.5, 2dr, $20k, 50k miles 05 Mazda...

I've got a 2005 Dodge Magnum. I just had the passenger-seat airbag warning monitor recalibrated because the warning light/chime was going off and on every minute or two whenever the passenger seat was empty. The technician told me something about the monitor getting all discombobulated if I put...

Hi, I have a Mazda 626, year 2000. I'd like to know if the automatic transmission needs a liquid replacement and if yes, after what period? Best regards, Badrday.

I recently have been noticing that my battery gauge has been going down drastically to about 9-10 with everything on (turn signals, radio, headlights, etc.). But when everything is off- the voltage goes back to 13. So I got a new alternator and had the battery charged up for about 10 minutes....

I have an '88 New Yorker that has been converted to 134. I've vacuumed out the system and added two cans of R134, this worked fine for a while but stopped cooling after 15 minutes. System is still charged. Looking at the suction side I see a vacuum, this slowly goes away after a minute and the AC...

I have a 1996 Ford Mustang GT with the 4.6L V8. My car's engine had the famous junky intake manifold that leaked coolant. About 2 years ago I bought an aftermarket intake with the improved design and installed it myself. The intake fit perfectly and worked perfectly...with NO leaks anywhere. I was...

currently watching "Trucks" on Spike while looking online for parts for my '55 STude project... I swear they've had at least 3 or 4 shots of someone tightening down a nut with an impact wrench in the last 5 minutes! Impacts are for loosening, torque wrenches are for tightening. come on...

When Fan on HI spd, AC Compressor Clutch releases...? 90 Nissan 240SX w/ factory AC - the HVAC fan has 4 speeds + off. Using the fan at up to speed 3: AC does a pretty good job of keeping the car cool almost up to triple digit temps outside. Once outside hits 100+ it can take a while to cool car...

GOOD MORNING, COULD ANY ONE HELP ME PLEASE, I HAVE A FIAT 128 AND I HAVE A PROBLEM WITH THE TIMING OF THE SPARK PLUGS, THE TIMING IS NOT CONSTANT, WHEN I CONNECTED THE HIGH TENSION WIRE TO ONE SPARK PLUG FURST THERE WERE TWO SPARK CONTINUIOUS AND THEN THERE WAS A REST OF 4 SECONDS THEN ANOTHER...