Are you the owner of a Jeep Grand Cherokee that did not live up to expectations? More directly, did your Jeep Grand Cherokee suffer a premature rear axle bearing failure? Did you find your contacts with Chrysler Corporation to be unproductive in getting assistance to pay for the repair?

I have a friend who has recently fitted a PTO to his land rover at the back. His intention was to drive a wood chipper unit that he has. He lives in Holland. He says that he has now found that the PTO rotates in the opposite direction to that required by the chipper( made in Europe). The trick...

Hi, everyone; I just bought a 1996 Jeep Cherokee. It's got the 4.0 liter high-output inline 6 cyl motor with automatic transmission. Of course, it didn't come with an owner's manual. It's been a long time since my last Jeep, so I have a couple of questions that I'm hoping someone can...

I notice the power and ground quick connect kits sold by Warn and others for the 8 to 10 thousand pound winches are rated at 175 AMP and sized for #2 gauge power cable. I figure the connects are rated for continuous duty @175 but are these components,both the connectors and cable, really heavy...

http://mad-dog16.tripod.com/ Enjoy -- Mad-Dog '79 Chevy K-10 Slightly modified --

I have a black 95 Dakota, V6, still with the stock exhaust. No cat, but that's going to change when I do the exhaust work, due to new PA emmissions regulations (those *******s). I have it beefed up a little as far as looks... off-road rims and tires, brushguard, 2" suspension lift, little doo-dads...

Duz any one know if hummer wheels will fit on a Dana 60 and 14 bolt chevy. I found a set but it look like they have a whole lot of inset. They are 12 16.5 36 thanks for any help

I recently purchased a 1999 Jeep Grand Cherokee. It's stock (4.0L 6cyl, 4x4 part or full time, automatic) except for a Flowmaster exhaust. It now has about 107k miles and I have noticed a slight pause in the shifting of 3rd to 4th gear, then a sudden jerk. I'm not positive if those are the correct...

I have a 91 HiLux with a 99 3L engine, 35" MTRs, and 4:56 gears. what are the Best lockers to get for this setup. I would like it to still provide limited slip when not engaged(in case of failure) but keep me from breaking gears on pavement and to be fully locked when engaged. I'm...

Anybody have input on the best places to buy cruizer parts? I'm in the process of buying an FJ55 and will be looking for aftermarket upgrades. Thanks, Jeremy Anderson (janderson at miletwo dawt calm)

I have an 70 cj5 with a 283 chevy motor instaled.Any info on a trany and transfer case to put in it ?

I need to replace my custom shocks on Suzuki Samurai with custom coil suspension and I found two types of shock absorbers on the market. 1. Very stiff when compressing and extending. 2. Very very soft when compressing, but extending is the same like in the 1. case. Which do you prefer for...

http://expage.com/justice2004

Hi there, I want to buy a decent small SUV or stn. wagon. After some research I narrowed the choice down to two models: Audi Quattro A4 1.8T and Subaru Forester 2.5XT. I had already test drives and I like both of them. SubaruXT has more power but Audi has far better finishing/interior. I have to...

I know this questions has been asked in here before, but I've run out of ideas. I have a '94 Jeep Cherokee with a 4.0 engine. It's got 151,000 miles and its stalling at random times. Mostly when just driving along on the highway. Here is a list of things I've already done ... 1. Replaced the...

Hi there, Is the Range Rover 2.5 tds from year 2000 any good? A guy offers me one for 25.000 EUR with only 80.000 km. Are there any know faults with this car? What I should look for? Any comment will be appreciated. Cheers.

Hi All, Long Story short. I have a 1993 Pathfinder (Turrano(?) outside of the U.S.). The Auto tranny blew and it's going to cost $2400US to fix. Doing a web/google search for a good used tranny to buy I came across a company that sells used Nissan "pull out" Diesels (with trannies still attached)...

A recall of your brain has been scheduled. (except in Mike's case as he has none)

Something I did this weekend... http://tinyurl.com/3ldah And yes, even though I own a Range Rover, I would never recommend one. It's in the shop every month. However, it does surprise me off road...

Does anyone maybe know what could be the cause on stock Suzuki Samurai carburetor not to work on idle and when engine reach higher RPM with pushing the throttle the engine RPM's are not still (goes lower and higher rpm constantly)? Is it dirty fuel or something else? --