I have a 1993, 5 spd. ,4.0 that will turn over but not start. for a while I was able to bump the selenoid and provided there was fire from the plug wire to the coil pack, it would crank up. When that no longer worked and there was no fire to the coil,I replaced the coil pack. It cranked...

I have a 1993 spd. 4.0 that will turn over but not start. for a while I was able to bump the selenoid and provided there was fire from the plug wire to the coil pack, it would crank up. When that no longer worked and there was no fire to the coil,I replaced the coil pack. I cranked up once. The...

I need help on the 4 wheel drive part.

I have seen Alot of FORD Explorer Radio this and that which are all incorrect if you have a factory amp. The color of wires dont work at all if its coming from the Amp. I need to know where the AMP is located and wiring from speakers to the amp and etc. If you are going to tell me its in the...

looking for gray cloth material front seats for 1993 dont need to be power seats It is like a bench seat. But, both drivers side and passenger side is separate seats. The drivers seat is longer connected to the center. expmiata (William)

I have a 1993 Ford Explorer Sport 2WD. The tranny sems to be slipping, and has problems going into reverse. Iam considering buying a used / rebuilt tranny. What year Explorer tranny's are compatable? Or shall I say withoput ECU etc.. changes

My '93 Explorer 4x4 won't engage. (I have 180,00 miles and running strong!!) I took it to a local repair shop and they said they had to tear the dash apart to get to the sender switch..Is this true????they were talking $600.00 to fix the problem..Can any of you help me????Is the 4x4 switch...

Recently when I turn a corner, the car continues to pull in that direction. It may pull a mile, or even 5. Eventually it quits pulling. If I turn another corner in the other direction, it pulls that way. Strong pull. I suspect it is whatever makes it come back to center that is not working right....

The trailer lights on my 1993 XLT with factory towing package are not working. When the wiring harness is installed the relays in the back left corner are clicking when activated. It appears that the 12V coming from the battery on the orange wire is not making it to the relays. I can't seem to find...

My explorer will shift normal but will not hit overdrive. If I come off the gas at highway speeds it will go in but back on the gas it will drop right out again. I hope someone out ther can help me thanks

Can any of the resident experts tell me which relay supports the Cruise Control. -- Ride safe Barry <©¿©> remove the (nospam) Sunny Ocala, FL 34482, USA http://home.att.net/~b.lockyer/index.htm

We have had a 1994 EB in the family for 11 years and always used keys to open the doors. Having just got round to reading the manual, I think it should have remotes. Can anyone confirm this and if so how do I get them. -- Ride safe Barry

I have replaced the alternator, positve battery cables and tested the battery, all fine. When i try to start the car it turns over really hard once, then fires up within the next 2 cranks. Its gotta be the wiring since when the car starts the radio clock is reset and stations gone. Also the...

my truck is having electrical problems. i think i have tracked it down to the positive terminal that runs from the battry. this terminal has three leads, 2 are 4 guage one runs to the solinoid and the other to the starter, the 12 guage wire runs from the solinoid down to the starter. one of the...

I need to find the left side quarter panel to get to the door lock mod to reprogram the keyless entry. I'm not sure were the left side quarter panel is

when i engage the 4x4 it works fine but i am concerned out the slight griding noise i hear and feel in the gas petal, is this normal? I assume with the 4x4 on i should experience a different feel in the gas peddle. It engages and disengages fine. The only other thing is when i turn over 1/2 way...

cruise control quit working the same time the brake light switch went out, i thought the the brake light switch had some thing to do with the cruise control going out but the cruise control didnt work after changing the brake light switch, the fuse is good, any suggestions, thanks, marlow.

Hi All, I've got a problem with the old girl. It starts fine, but once it idles down to its regular idle RPM, it starts to chug and is burning a ton of gas. If I remove a vacuum line, the truck runs a lot better. There's a little more to this story. I had a problem with the starter engaging...

Hey everyone, When I bought my truck, the 4 wheel drive did not work (front wheels did not have power). My mechanic observed that the right side worked, but the left side did not. I picked up a used hub at the wreckers, installed it, and the 4x4 now works fine. However...when i disengage the 4...

My '94 Explorer pings horribly whenever I put regular octane gas in it. The pinging is worst when I accelerate. I've been putting premium gas in it and that helps quite a bit, but it still pings whenever I accelerate into a stiff wind. I've changed spark plugs, wires, air filter and fuel filter. ...