The display shows "CD ERROR" and will not eject/ load / or play. There are 4 CD's in the unit and nothing works. All other functions are OK. This is a 2002 explorer. Any ideas? TIA

I did the same as you except I did use the staple gun method described in the instructions. I just had to get the dust off the staple gun in the garage and go buy the recommended staples, but thought that would be easier than the taping method described. It worked out great. For less than $26, I...

I am looking at both, what one do you think will be the most trouble free assuming it has been taken care of. also would like to know the good points and bad points of each. Thanks for your help

Anonymous wrote: > Hi All: > > Need to replace front rotors and pads. Not knowing any better, I am leaning > towards Bendix brand, but it is significantly more expensive. > > I wonder if the Bedix price is worth the money, or what brand would be the best > ? >

IN my experience there is really not much you can do about it. THe original glue is dried to the glass, That has to be removed first. you may as well take it to a reputable tint place and get a suggestion from them. Elmers glue will not work, the freshly glued area will be opaque at best. Searcher1

Hello to All, I have a 1999 Explorer XLT 2WD 4.0 SOHC. Now with about 76K miles I'm having what appears to be my first problem (other than the killer tire swap). I hear a metal on metal clunking noise in the front end while driving. It's not only when braking and/or turning, but braking and...

Hi all. I have a 96 I bought used several years ago, and in this time I've never had it tuned up. I've never experienced any drivablility issues, so I'm wondering if it should be done despite this? I have had the air filter changed a few times, but not the other typical tune-up stuff. I'd be...

i have a explorer whenever i put in drive or reverse it stalls what could the problem be neutral safety switch, modulator valve , i am lost any info would be great thanks

autozone told me that my 2002 Escape doesn't need a transmission filter- my brother in law is doing a tune up and confused by this. anyone have a definitive answer? can he change the trans fluid without changing the filter?

Yeah, I wasn't too good at the do it yourself soldering either. I guess I should have left it to the pros. I went ahead and did the "Save My Sanity" swap at www.shareamemory.com/radio and was able to fix my radio without shipping it off and using only a philips screw driver to remove three screws...

I have a 1991 Explorer XLT w/183,000 miles on it. My problem is when I start her up.She makes a high pitched squeal that is sort of rythmic. I can tell it is from the belt or the bearings. It stops after the engine is good and warm. I wonder if I should replace the belt, but upon inspection it...

I did a little research, and found that the market sets car prices, not the manufacturers. That being said, both the new and the used car market prices HON/TOY products to last about 150,000 miles. Sure, many go much longer and still have some residual worth at 150,000 miles. At 150,000 miles, they...

When I turn off the ignition, the antenna does not automatically go down as it is supposed to. The antenna motor runs, but the antenna stays up unless I get out and tap on the top of it, and then it retracts and the motor stops. If I don't do anything, the motor stops running after about...

what type of air filter is used for a 96 explorer 5.0 im using the fram 8141 but it keeps clapsing causing the emgine light to come on. any ideas -- Posted using the http://www.autoforumz.com interface, at author's request Articles individually checked for conformance to usenet standards Topic...

Hey - I've got a '98 Explorer, standard 6-cyl, auto, with about 120k miles. In the last 2000 or so miles, it has developed a roaring noise when the engine is hot and car is idling. The noise is very loud when the air intake is removed from the air filter compartment. My mechanic said there's a...

I have a 2002 explorer that about 3 months ago started binding in the front-end when making sharp (usually slow) turns. Though intermittent, the problem appeared to only happen in reverse (when backing out of my driveway). More recently, I've been towing a trailer, and the problem appears...

My 4 wheel drive is not working. I have power at both of the known fuses but none at the switch or motor. Is there a relay some place that is not shown in the owners manual? dvet

Anybody with a "02 or new have a problem with the 6 disc units left output channel low or almost none comming out of the left speakers. Doesn't make any difference if the unit is on "cd" or "radio". Then what happens is you adjust the volume up/down and or L-Rt balance, then all of sudden sound...

My gas guage is not werking any more. Electricity off = just above empty. Electricity on= right on empty, not below, not above Negative ground bad? It was working so-so for a few weeks just before it crapped out. It would be on empty and than it would rise up and go to the right place.

92 explorer stalled while on highway, bucked and popped. I had no fuel flow. changed fuel pump, checked reset. vehicle will not start. any ideas?