Have a gas smell that's getting stronger since I 1st noticed it coming from the engine a few weeks ago. I see no drips underneath the engin and the feul gage *seems* to be on target for gas use. A new after market intake and outtake was put in about a year 1/2 ago. Drives fine......What could it...

Read in a few places that the 94 1.8 is limited at 7000RPM. Mine seems to spin a bit further than this, looks like 7200 on the tacho. Anyone confirm what it really is?

Hi all, I wanted to upgrade my 94 Miata brakes with some new rotors, lines and pads, possibly without changing wheels (still have the OEM 14" alloy). I was thinking of something like: http://www.good-win-racing.com/mazda/miata/13-1025.html Any suggestion/experience on the subject.

A friend has a 94 Miata that pops out of fifth gear. Any suggestions on a fix? Thanks in advance.

I have a 1995 mazda miata with the hold light flashing. Sunday when I turned the car off then back on it went away but now it just stays on. It seems to drive fine though. Supposedly the transmission has already been replaced. Anybody have any idea at what I am looking at? -- posted from...

hi, thanks to chris m for posting the pic of the brackets i am having trouble putting back on my motor. http://tinyurl.com/md6u9s (once again, lesson learned...even if you "know" it will only be 3 weeks before the block comes back from the shop, label every thing and take pix!...the block...

I would appreciate any tips on how to remove the cylinder/lock from the glove compartment latch. The glove box latch was broken by a thief. A replacement glove box latch was easily obtain from Mazda ($15) and only requires three screws for installation (easily accessible from the inside of the...

hi, 95 w-ed w/ sebring blower, (~12k on the rebuilt drive train, 125k on chassis), generally runs fine however, there are times the tach jumps 3-400 rpm and the car spits/hesitates/stumbles. part of the blower install requires splicing wires into the cam position sensor harness, (i didnt do...

hi, the old girl has a tired motor at 113k miles. she has a jr/sc w/ at least 87k. the head was done at ~90k. i was thinking of a monster job bu at the realistic cost of $10k, that is not going to happen. so i would like at least the pep she had before and the options i was considering a

changed the timing belt all marks lined back up but still feels like valve timing is out sluggish on acceleration sounds like theres sone spark knock play with dist. timing but no better.,any advice would be great!

Ive changed coolant temp sensor,thermostat,flushed and refilled my radiator.My car is still overheating the water pump has recently been replaced and the system has no leaks.Could anyone point me in the direction as to what else may cause this.It will run about 45min to 1hr before overheating.

Anyone have an idea how to get the alternator out? I've already got it completely disconnected, but can't seem to figure out how to get it out of it's confined space. Do I have to remove something else?

Just a heads up, there's a guy in CA on miata.net selling a high mileage 95 Merlot for about what the 15"BBS wheels are worth! I'm not kidding, act fast, he wants to get rid of it for $850! If someone hasn't already bought it I'd just about s _ _ t my pants. Good luck, Chris

Hello, This is my first time posting to this site. I was driving my wifes 95 Miata 1.8 ltr to work and it died. All the electrics worked, except that it died (It happened at 4:30 am. So head lights were in use.) I bought a new coil pack and that did nothing. Any ideas of where I should look...

hi, wife came home last night saying the car was steaming and very hot. today as i looked at it i see a crack near the upper hose. is this something some epoxy can cure? if not, what are good sources for a radiator? tia, peter

Looking for help in troubleshooting my 95 Miata. The check engine lt came on, when I diagnosed it the code was 17, the oxygen sensor (output not changing). Anyone with any ideas? I'm planning on checking the o2 sensor, but beyond that what else should I look for. thanks, Arne

sigh, i found the head locating dowel on the floor of my garage and while i probably know the "correct" answer, i was hoping someone would tell me that it isnt really necesary to have it installed. btw it has a sebring sc on it, (or will soon). removing the head would make mounting the clutch...

hi, swmbo's 95 with a jr/sc has been stumbling at steady throttle, especially when cold, so i decided to solder the cam pos sensor and throttle pos sensor wires where the blower related wires had been 3m'd or crimped t ensure that was not the issue. well one lead came out of the cps and the tps...

i cant find anyone, (fm, local boneyard), to let me cut the connectors i need off the harness. so i thought if i could determine other applications with the same connectors i would have more sucess. is there an interchange guide between a 94-97 miata and other cars, ( festiva, 323 ??)? where is...

My '96 M's OEM alarm is now inop (no keyless entry, alarm, headlights) with a rapidly flashing LED on the steering column switchbox. I've read on other sites that this is probably due to frying the control box when I installed a new battery, but none of them tell me where to find the controller. ...