I finally broke down and bought the HF Pittsburgh Bead Breaker, Harbor Freight item 92961. ( http://i.cubeupload.com/Lb3Fof.jpg ) I used that harbor freight bead breaker to break the beads on four difficult steel-rim wheels with Optimo P235/75R15 108T thick-sidewall tires seemingly glued...

I have a 1998 Jeep Grand Cherokee Limited 5.9 I'm having Electrical problems. Started with the headlights going on and off randomly when light switch off and vehicle parked. I've checked everything I can find to make sure I'm not leaving anything on except the alarm. \r\n Only way I've been...

('07 Cobalt, 60K miles) NOTE: CAR DOES NOT HAVE ABS OR TRACTION CONTROL. This is our first winter storm with this car. On slippery surfaces (slush/ice/whatnot), there is a significant rapid clanking/knocking sound, probably from the left front. No such sound are dry pavement. There is no...

I am researching the tools and supplies for static balancing at home a 15-inch typical SUV steel wheel and simply ask for advice from those who have been successful balancing steel wheels statically at home. http://i.cubeupload.com/0D6Lnt.jpg I already have the adhesive style California non-lead...

Practical advice (helpful hints & suggestions) requested from those of you who have successfully checked camber at home (to sufficient accuracy). If you have never checked your automotive alignment camber at home, you probably won't be able to add much practical value to this thread; however if...

Feel free to contact us at www.sythenticsolutionsUSA.com servicing all of North America including Canada ~ the USA is because it's made in the USA. Building trust in #AMSOIL as your CHAMPIONS of #performanceandprotection for your vehicles

'07 Cobalt, electric power steering. Steering rack is failing. To remove it, the pinion input shaft has to be disconnected from the universal joint that's at the end of the intermediate shaft. On this car, the u-joint has a sleeve that fits over the end of the pinion shaft, locked with a pinch...

The quad..2.3 and 2.4 modles do not like thermocycling... the head gasket and head especially, they like to crack around 150,000 miles... so if tou havent had to do any of that yet id save for it... also if you have the means start saving for a waterpump also...thats a 8 hour job... as for the cams...

2006 SRX 3.6 number 4 cylinder was misfiring so I swapped number 1 and 4 coil packs to check it and now it will start but quits so I unhooked the battery cables for 15 minutes and tuned the key on for 10 minutes to reset the security system and nothing has helped

Hello, all. Last evening (12/7/16) NBC news aired a segment demonstrating devices that would ostensibly capture keyless entry codes from the key fob and allow both entry, start-up, and drive away of a motor vehicle. a couple of questions come to mind: 1. My understanding is that vehicle...

i have a 1965 galaxie 500 convertible with a 352 auto i just got the car about two months ago the transmission was rebuilt the day before i got it it didnt eve have 100 miles on it at time of pickup it was sluggish to shift at first and i figured it was just because it was new and needed to be...

1995 Toyota Tercel 224,000 miles, 3 speed automatic. Twice now (5 months apart) the tranny up shifts quite late. I'm a conservative driver and I'm always in third gear by the time I get to the other side of the intersection from a standing start. That would be about 10-12 mph.. Two times now I...

What kind of life do users of this plug get ? It is rated at 80 - 100K. Thanks.

A Millionaire for Christy movie.1951 Fred MacMurray, Eleanor Parker, Richard Carlson movie on the TCM channel right now.What is that sleek looking convertible car in that movie? cuhulin

**i have the valet 551r setp in my 01 dodge ram , works great until i lost range on the remote , new batterys and wires are good , any ideas ? i have to stand next to the truck to do any modes , start , doors , so on . any help , thanks -- for full context, visit...

One example: Holden Commodore. All have 5x120 wheel studs. However, the later models are heavier, so new wheels are stronger. Holden made the centre bore smaller to stop people fitting older wheels, that might not be rated for the load.

On 11/05/2016 03:58 PM, Percival P. Cassidy wrote: >>>>> I have a 2008 Vibe and want to get a set of used steel wheels on which >>>>> to get snow tires fitted. The installer (Costco) says they are not >>>>> allowed to install tires if the vehicle originally had TPMS and does >>>>> not have...

On Sunday, July 4, 1999 at 3:00:00 AM UTC-4, dc wrote: > hey, that's backwards acording to the URL > > the 194 is 2 and the 168 is 3 > > but that's inconsistent with what rm wrote about his 194s being brighter. I > guess I should just try them out then. > > Some of the bulbs in the dash are...

The Haynes manual says to swap out the relay with a known good one to see if that is the problem. There is some very vague stuff about the wiring harness. I'm satisfied that it isn't the horn buttons themselves since there are 2 of them. I don't like to think about bad connections in the steering...

ok here's one for you. i drove my truck roughly 35 miles to pick up my check. shut the truck off got my check.got back in my truck drove approximately 1/2 a mile to cash it. shut it off to go in the store walked right back out got in the truck cranked it was texting my husband (before taking off)...