Bought a new set of front rotors (Canada Tire) for my 2000 300m. Had 2 choices - standard quality and "premium" quality. Difference seems that one is made in China, the other in the US of A. Since the standard quality ($60 each) was out of stock, I bought the premiums ($75 each, or $62...

I have a 1995 Chrysler Lebaron. In 2-3 years I had to have three times the transmission worked on. First I paid around $1500 then $600 then free. However, the transmission is go crazy again for the 4th times. Do someone else had the same kind of problem with this type of car or am I doomed?

Archive-name: autos/chrysler-faq/general/part2 Posting-Frequency: 15 days Last-modified: 2005/7/21 Version: 4.6 This section is generally revised every 300 days. SERIOUS updates to the body code list, July 2005. IMPORTANT. Do not attempt to respond to . Due to spam this address DOES...

Archive-name: autos/chrysler-faq/general/part1 Posting-Frequency: 15 days Last-modified: 2005/7/21 Version: 5.9 This section is generally revised every 300 days. - - - - - - - - - - - - IMPORTANT. Do not attempt to respond to . Due to spam this address DOES NOT GO ANYWHERE. Instead,...

I have a 2001 Sebring and often, when I am setting at a redlight, my temp gaugue will go from about 1/2 way to 3/4 of the way to hot. When I start going again, the gauge comes back down. I have had my car in the shop at least 4 times to see if they can find a problem, but my thermostat and fans...

Has anyone come across a "clunk" in the front end of their Neon? I have replaced the control arms (brand new) New links, new Tie-Rods, new ball joints, wheel alignment...and the "clunk" continues. I have brought it to my local Chrysler dealership (and 3 other independant mechanics) and they say...

ok i bought a 2003 cruiser about a month ago and i love it now my question is i live in western ny near buffalo and was wondering if there is any cruiser clubs in my area

2005 Sebring, 2.7L, 25K mi / yr, mostly highway @75 mph but some short stuff, too, so Schedule B seems to fit. Schedule B says oil change every 3K mi (about every 6 weeks), but the oil is still clean enough to read the dip stick markings. Seems a shame to change it this soon. Would going to a 5K...

i have a concorde that code 27 comes up.It previously had the code for the oxygen sensor but i fixed that.So how do i fix it for code #27.

I am starting the unrewarding task of switching out the front doors on a 92 Voyager. This van originally came with power door locks and power mirrors. For some unexplained reason, the previous owner put doors on it from 89 and 90 Vogaer. They fit to a degree, but this van looks like a NY taxi with...

Very recently I've noticed a noise coming from my front end. I've only noticed it at very slow speeds when turning the steering wheel fairly rapidly, such as maneuvering to park. There is a noticeable muffled clunk noise from the passenger side front when the car's direction is being changed. It...

I'm considering buying a mk2 Neon - the Parkers guide says that I should expect to get between 32 to 35 to the UK gallon for models sold here in the UK. Does anyone here actually own a Neon? If so, is this a realistic MPG figure for this car? Please post or respond to my email address. Artie

There's no mention of this relay in the power center under the hood, so I presume it's one of the relays on the fuse panel under the dash. Can anyone tell me which one it is? They're not labeled.

I have a 1993 Concorde 3.5L, would like to know easiest way to change crank sensor, i.e. from the top, or jack up the car and go from the bottom? Thanks!

Hello, I am having an issue with my 2000 neon. I believe it may be the O2 sensor but am not real sure. The engine light comes on after about 1 minute of operation. The car seems to have a loss of power in the low rpm's and the higher the engine rev's it get better. at about 2500 rpms or so it seems...

Hey guys. ? for ya.. my 97 neon decided it wanted to make alil noise in life.. A nice tick.. now i had the joy of tearing the front off the block to get the head off of it. took to the head to a respectable shop. the head was alil pitted and may be milled down. the valves and rest of it are...

I'm looking for decent, inexpensive rims for my PT Cruiser. I've been looking around on the net, and most sites only have a handful of wheels, and they look like they belong on Hondas. Any ideas for someplace with a big selection? Or any tips on other factory Mopar rimes that would work? Neon...

Hello to All! Today, I tried switching from the 5th to the 3rd cd and immediately the 3rd led starting flashing and the lcd says "Err". You can hear the cd spinning (its a store-bought soundtrack) forward and backward but you can’t play or eject it from the player. You can’t switch to another cd...

I brought the car in for servicing, because car was shaking at 40 mph and also on acceleration up a hill, Technician said it was CV joints, I had them replace them and they tested out and found it to still be shaking at 40, they removed the new axles and put back old ones, they started looking...

I have a 1995 lebaron convertible, auto, 3.0., with a 604 trans. It shifts fine when cold, but after 15 minutes, it locks into second at slower speeds.I think it's going into the "safe mode". If I get it up to about 40mph, I can put it into nuetral, shut it off, restart and then put into drive,...