|
|
'05 Ford Explorer Power Outlet by
M. Prindle
Hello everyone,
I just got a new '05 Ford Explorer XLS and I was disappointed to find
out there is only one 12V power outlet in the whole truck. I need at
least two outlets one for my radar detector and the 2nd would be used
intermittently for various other uses including a cell phone charger or
a...
|
|
1 |
1,041 |
|
|
92 XLT Service Manual by
m.Dongle
Are there any online references to the Service Manual, specifically the
fuse box diagram?
|
|
2 |
564 |
|
|
transmission pan bolts by
mab6680
ok I have a 2000 xls 4.L OHV I was doing an oil change and noticed that
there was two bolts missing from the transmission pan and a little fluid
on the pan so I went and bought the bolts and figured while I was there I
would do the filter too I get home get under the truck and all of the 16
bolts...
|
|
1 |
234 |
|
|
odd rear window washer problem by
mab6680
ok I'm a bit baffled I have a 2000 xls with an 4.0 ohv when I park in my
driveway witch has a slight incline all of my washer fluid dumps out of
the nozzle that sprays the fluid on the glass I tried replacing the pump
but I still pours out of the nozzle when parked on an incline any
suggestions...
|
|
1 |
1,157 |
|
|
niose in wheel well area by
mab6680
i have a 2000 xls 4wd 4.0 ohv i repaced the rack and tie rod ends about a
year ago and just replaced all of the ball joints and end links last
weekend when i was done and took it for a test ride there is a rattle and
a thump in the front passenger side wheel well so i took it back home and
checked...
|
|
5 |
426 |
|
|
just a dumb question by
mab6680
i have 2000 xls 4.0l ohv i was replacing some bulbs in my instrument
cluster today when i removed the trim panel around the cluster the one
with the head light switch in it there was a connector plugged in on the
opposite side of the head light between the radio trim panel and the
cluster its self...
|
December 15th 05 02:15 AM
by johanb
|
4 |
687 |
|
|
windshield washer by
mab6680
i have a 2000 xls 4.0l ohv my windshield washer in the front does not work
the rear washer does work i have changed the pump but the front still
does
not work both front and rear works off the same pump i also changed the
multi function switch for other reasons but still no washer in the front
if...
|
|
8 |
801 |
|
|
multi function swith by
mab6680
anybody know why the ford service manual says to remove the ignition switch
cylinder to replace the multi function switch
|
|
5 |
431 |
|
|
motor sounds loud by
mab6680
I have a 2000 xls 4 door 4wd with the 4.0 ohv i bought the truck used with
63k miles on it the motor had 30k it now has 93k miles when i start it up
the motor seems to very loud more when it's cold out when it warms up it
gets quieter but stills seems a little loud some time it sounds like a
diesel...
|
|
8 |
292 |
|
|
camber by
mab6680
I just rebuilt the front end of my 2000 xls 4WD 4.0L. I replaced the
shocks, ball joints, wheel bearings, end links and an inner tie rod. I
also raised the front by about a 1/4 inch via the torsion bars. When I
went to get a alignment they told me the right side camber was off by -1.
he told me...
|
October 25th 06 11:52 PM
by mab6680
|
2 |
523 |
|
|
2106 tac system forced limited power by
mab6680[_2_]
hi I have a 2004 explorer with the 4.0l flex fuel motor (K) with 36,900
miles on it. about two weeks ago we had a little bit of snow. when driving
home from work I noticed it was down shifting real hard. so I took it to
the tranny shop but they didn't get to it in till the next day when the
snow...
|
|
2 |
637 |
|
|
skid plate by
mab6680[_2_]
i have a 04 xls 4 door 4wd with the 4.0l flex fuel. im looking for a skid
plate any ideas where to get one
--
Message posted using http://www.talkaboutautos.com/group/rec.autos.makers.ford.explorer/
More information at http://www.talkaboutautos.com/faq.html
|
|
1 |
816 |
|
|
brakes by
mab6680[_2_]
I'm going to try my best to explain this so bare with me. Over the last
year or so the brake pedal will get low and mushy. Here's the part that
has me baffled it doesn't happen immediately. This is so gradual It will
take a month or two before it is noticeable. If you have to stomp on the
pedal to...
|
|
2 |
700 |
|
|
installing real oil pressure sender Merc Mty 5.0 by
MACE
well, i bought a real one for my 2000 mountaineer, 5.O AWD..hate the dummy light/gauge. then i went under the truck and saw where the oil pressure switch is...looks like a real bitch to get a t-fitting in there. i was on line yesterday, and saw an oil filter relocation kit..i am wondering iF i can...
|
March 4th 05 10:53 PM
by MACE
|
0 |
602 |
|
|
Oil Filter Relo kit / engine RPM's by
MACE
Installed oil filter relocation kit, and didnt notice at first, as I have a jumpy tach...but the RPM's are lower. Engine noticebly running cooler per the temp gage also / maybe 20 deg cooler. In Idle, when hot, down 100rpm, and pretty much down 100-200rpm through most speeds. Not sure if this is a...
|
March 28th 05 01:00 PM
by MACE
|
0 |
262 |
|
|
Tach problem 2000 Merc Mty AWD by
MACE
OE Tach on 2000 Merc MTY 5.0 acting erratic. Jumps around while driving, drops to 100-200 RPM at idle, but actual RPM's not noticibly lower. Kind of seems like its almost twitching, and fading away so to speak. Is there a sensor involved that I can check, or am I going to have to dismantle my dash?...
|
|
1 |
559 |
|
|
Engine & Transmission Fluid by
MACJAC
OOPS!
I put Auto. Transmission Fluid (1 qt.) by mistake in my engine.
I drained all the oid from the drain pan and then added 4 qt.'s of Motor
Oil BEFORE starting it, though.
Should the engine be o.k. or should I take it in and have the oil changed
at a lube place?
|
January 7th 06 07:49 AM
by MACJAC
|
5 |
310 |
|
|
heater core by
MACJAC
Need help replacing HEATER CORE on '91 Explorer E.B.
|
|
5 |
451 |
|
|
Explorer with high engine oil pressure? by
[email protected]
I have a 116,000-mile 94 Explorer with the 4.0 V-6 engine that suddenly
started to show high oil pressure. I replaced the sending unit but it
still reads max pressure. The engine sounds normal (quiet, no miss),
and I'm wondering if I have worn insulation to the wire to the oil
pressure gauge, or if...
|
|
2 |
366 |
|
|
out of line doors by
mackrice
I noticed that my doors arent closing right-And I actually have to slam them
really hard in order for them to stay shut-The pins on my doors seem like
theyre too small-How hard is it to change them?(both front doors)
|
|
2 |
1,234 |